ADA Compliant
Showing 1–64 of 99 results
-
WELS-2260 Envy Series Two Station Solid Surface Lavatory System
The Willoughby WELS-2260 Envy Series Two Station Solid Surface Lavatory System is a contemporary, multi-user solid surface fixture for vandal-resistant commercial use. Willoughby Aquasurf® lavatory fixtures are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. Standard WELS-2260 fixtures come with a contoured multi-user lavatory basin, drain grate assembly, and preassembled stainless steel mounting pedestal with removable shroud and mounting backplate (anchoring hardware and adequate backing by others). The WELS-2260 lavatory system can be supplied with optional faucet hole drilling and/or a wall- mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WELS-2260 Envy Series Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WELS-2230 Envy Series Single Station Solid Surface Lavatory System
The Willoughby WELS-2230 Envy Series Single Station Solid Surface Lavatory System is a contemporary, single-user solid surface fixture for vandal-resistant commercial use. Willoughby Aquasurf® lavatory fixtures are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. Standard WELS-2230 fixture comes with a contoured single-user lavatory basin, drain grate assembly, and preassembled stainless steel mounting pedestal with removable shroud and mounting backplate (anchoring hardware and adequate backing by others). The WELS-2230 lavatory system can be supplied with optional faucet hole drilling and/or a wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WELS-2230 Envy Series Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WELS-2290 Envy Series Three Station Solid Surface Lavatory System
The Willoughby WELS-2290 Envy Series Three Station Solid Surface Lavatory System is a contemporary, multi-user solid surface fixture for vandal-resistant commercial use. Willoughby Aquasurf® lavatory fixtures are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. Standard WELS-2290 fixtures come with a contoured multi-user lavatory basin, drain grate assembly, and preassembled stainless steel mounting pedestal with removable shroud and mounting backplate (anchoring hardware and adequate backing by others). The WELS-2290 lavatory system can be supplied with optional faucet hole drilling and/or a wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WELS-2290 Envy Series Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
AS-S3060ADAF Aquasurf® Solid Surface 30×60 Roll-in Shower Base w/Integral Front Trench Drain
The Willoughby AS-S3060ADAF Aquasurf® Solid Surface 30x60 ADA-Compliant Roll-in Shower Base, w/ Integral Front Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby Aquasurf® shower bases are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3060ADAF shower bases features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The front drain is available in Left, Center, or Right configurations. The AS-S3060ADAF shower bases can be supplied with optional color-matched solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3060ADAF shower base are made underneath the fixture. -
AS-S3636ADA Aquasurf® Solid Surface 36×36 ADA-Compliant Transfer Shower Base w/Integral Rear Trench Drain
The Willoughby AS-S3636ADA Aquasurf® Solid Surface 36x36 ADA-Compliant Transfer Shower Base, w/ Integral Rear Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby Aquasurf® shower bases are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3636ADA shower bases features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The rear drain is available in Left, Center, or Right configurations. The AS-S3636ADA shower bases can be supplied with optional color-matched solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3636ADA shower base are made underneath the fixture. -
AS-S3636ADAF Aquasurf® Solid Surface 36×36 ADA-Compliant Transfer Shower Base w/Integral Front Trench Drain
The Willoughby AS-S3636ADAF Aquasurf® Solid Surface 36x36 ADA-Compliant Transfer Shower Base (ADA Shower Pan), w/ Integral Front Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby Aquasurf® shower bases are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3636ADAF shower bases features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The front drain is available in Left, Center, or Right configurations. The AS-S3636ADAF shower bases can be supplied with optional color-matched solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3636ADAF shower base are made underneath the fixture. -
CWSMS-ADA Series ADA-Compliant Surface Mounted Wall Shower
The Willoughby CWSMS-ADA Compliant Surface Mounted Wall Shower is a single-user fixture for use in commercial environments with or without an accessible mechanical chase. Sloped-top CWSMS-ADA shower fixtures are fabricated from riveted 18 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWSMS-ADA fixtures come with a hand held Flexshower head, 24” Slide Bar, selected valve assembly, with anchoring through the included Z-clip and mounting flange (anchoring hardware and adequate backing by others). The CWSMS-ADA shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc., all factory-installed within the shower fixture (unless noted). All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel cabinet. The CWSMS-ADA shower fixture meets all ADA accessibility guidelines when mounted at the correct applicable height above the finished floor. -
CWSMS-ADA-WH Series Wide Housing ADA-Compliant Surface Mounted Wall Shower
The Willoughby CWSMS-ADA-WH Wide Housing, ADA-Compliant, Surface Mounted Wall Shower is a single-user fixture for use in commercial environments with or without an accessible mechanical chase. Sloped-top CWSMS-ADA-WH wide housing shower fixtures are fabricated from riveted 18 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWSMS-ADA-WH fixtures come with two selected shower heads and valve assembly, with anchoring through the included Z-clip and mounting flange (anchoring hardware and adequate backing by others). The CWSMS-ADA-WH shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc., all factory-installed within the shower fixture (unless noted). All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel cabinet. The CWSMS-ADA-WH shower fixture meets all ADA accessibility guidelines when mounted at the correct applicable height above the finished floor. -
LRBHL-2320 Ligature-resistant Solid Surface, Behavioral Healthcare Lavatory
The Willoughby LRBHL-2320 Ligature-resistant Solid Surface Behavioral Healthcare Lavatory is a single-user fixture for vandal-resistant behavioral healthcare environments. Willoughby Aquasurf® lavatory fixtures are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. Standard LRBHL-2320 fixtures come with a contoured lavatory basin; drain assembly; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the LRBHL-2320 behavioral healthcare lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
WBIS-ADA Series ADA-Compliant Rear Mounted Built-In Shower
The Willoughby WBIS-ADA Rear Mounted Built-in Shower is a single-user fixture for use in security environments with an accessible mechanical chase. Shower plates are fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBIS-ADA fixtures come with an (2) shower heads, (2) component shower plates, and standard 4-point mounting. The WBIS-ADA built-in shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear of the vandal-resistant, stainless steel plates. The WBIS-ADA built-in shower fixture meets all ADA accessibility guidelines when all components are mounted at the correct applicable heights above the finished floor (installation by others). -
WBIS-FA-ADA Series ADA-Compliant Front Mounted Built-In Shower
The Willoughby WBIS-FA-ADA Compliant, Front Mounted, Built-in Shower is a single-user fixture for use in security environments with an accessible mechanical chase. Willoughby front mounted shower plates are fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBIS-FA-ADA fixtures come with two selected shower head and one selected valve assembly, with anchoring through the component shower plates (2-3 plates included, anchoring and adequate backing by others). The WBIS-FA-ADA built-in shower can be supplied with a variety of optional features including: valves, controls, plumbing, in-wall accessories, etc. All connections between the outside plumbing and the fixture are made behind the vandal-resistant, stainless steel plates. The WBIS-FA-ADA built-in shower fixture meets all ADA accessibility guidelines when all components are mounted at the correct applicable heights above the finished floor (installation by others). -
WRS-ADA Series ADA-Compliant Rear Mounted Recessed Shower Panel
The Willoughby WRS-ADA Rear Mounted, Recessed Handicap Shower Panel, w/(2) Shower Heads, is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WRS-ADA fixtures come with (2) shower heads and standard 8-point mounting. The WRS-ADA shower panel can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear of the vandal-resistant, stainless steel panel. The WRS-ADA meets all applicable ADA requirements when correctly mounted (installation by others). -
WRS-ADA-WH Series Wide Housing ADA-Compliant Rear Mounted Recessed Shower Panel
The Willoughby WRS-ADA-WH Rear Mounted, Recessed Handicap Shower Panel, w/(2) Shower Heads, is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WRS-ADA-WH fixtures come with (2) shower heads and standard 8-point mounting. The WRS-ADA-WH shower panel can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear of the vandal-resistant, stainless steel panel. The WRS-ADA-WH meets all applicable ADA requirements when correctly mounted (installation by others). -
WRS-FA-ADA Series ADA-Compliant Front Mounted Recessed Shower Panel
The Willoughby WRS-FA-ADA Front Mounted, Recessed Handicap Shower Panel, w/(2) Shower Heads, is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixture panels are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WRS-FA-ADA fixtures come with (2) shower heads and 18 gauge galvanized steel mounting frame (shipped separately). The WRS-FA-ADA shower panel can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel panel. Removable face panel attached w/ security screws allows access to all fixture plumbing and mounting points within. The WRS-FA-ADA meets all applicable ADA requirements when correctly mounted (installation by others). -
WRS-FA-ADA-WH Series Wide Housing ADA-Compliant Front Mounted Recessed Shower Panel
The Willoughby WRS-FA-ADA-WH Front Mounted, Recessed Handicap Shower Panel, w/(2) Shower Heads, is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixture panels are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WRS-FA-ADA-WH fixtures come with (2) shower heads and 18 gauge galvanized steel mounting frame (shipped separately). The WRS-FA-ADA-WH shower panel can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel panel. Removable face panel attached w/ security screws allows access to all fixture plumbing and mounting points within. The WRS-FA-ADA-WH meets all applicable ADA requirements when correctly mounted (installation by others). -
Ligature-resistant, rear mounted, wall outlet, floor mounted, blowout series toilet
The Willoughby ASETW-1490-FM Ligature-resistant, rear mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETW-1490-FM fixtures come with an elongated blowout toilet bowl and standard 6-point floor mounting (4 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETW-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETW-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETW-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Stainless Steel Single Person Rear Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU Stainless Steel Single Person Rear Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel urinal. The ASUW-1314-HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
AquaDeck 2230 Series Square Front (1-1/2″) Solid Surface Lavatory Deck
The Willoughby WAD-2230 AquaDeck Square Front (1-1/2”) Lavatory Deck is a single- or multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaDeck lavatory decks are constructed of Aquasurf® cast polymer resin, a stain, impact, and burn-resistant solid surface material. The WAD-2230 deck can be ordered with up to four separate, integral wash stations, featuring a 1-1/2” square-eased front edge and straight sides. Standard WAD-2230 fixtures come with oval lavatory bowls and integral overflows, with the deck designed to be supported by an in-wall carrier system (in-wall carrier, anchoring hardware, and adequate backing by others). Heavy gauge, Type 304 stainless steel mounting brackets are an available manufacturer option. The WAD-2230 square front lavatory deck can be supplied with optional features, including: faucet hole drilling, mounting brackets, modular drain shrouds, etc. (installed by others). All connections between the outside plumbing and the WAD-2230 lavatory deck are made underneath, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable deck rim height above the finished floor. -
AquaDeck 2235 Series Square Front (3″) Solid Surface Lavatory Deck
The Willoughby WAD-2235 AquaDeck Square Front (3”) Lavatory Deck is a single- or multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaDeck lavatory decks are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. The WAD-2235 deck can be ordered with up to four separate, integral wash stations, featuring a 3” square-eased front edge and straight sides. Standard WAD-2235 fixtures come with oval lavatory bowls and integral overflows, with the deck designed to be supported by an in-wall carrier system (in-wall carrier, anchoring hardware, and adequate backing by others). Heavy gauge, Type 304 stainless steel mounting brackets are an available manufacturer option. The WAD-2235 square front lavatory deck can be supplied with optional features, including: faucet hole drilling, mounting brackets, modular drain shrouds, etc. (installed by others). All connections between the outside plumbing and the WAD-2235 lavatory deck are made underneath, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable deck rim height above the finished floor. -
AquaDeck 2240 Series Angled Front Solid Surface Lavatory Deck
The Willoughby WAD-2240 AquaDeck Angled Front Lavatory Deck is a single- or multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaDeck lavatory decks are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. The WAD-2240 deck can be ordered with up to four separate, integral wash stations, featuring 45-degree angled front corners with matching sides and eased edges. Standard WAD-2240 fixtures come with oval lavatory bowls and integral overflows, with the deck designed to be supported by an in-wall carrier system (in-wall carrier, anchoring hardware, and adequate backing by others). Heavy gauge, Type 304 stainless steel mounting brackets are an available manufacturer option. The WAD-2240 angled front lavatory deck can be supplied with optional features, including: faucet hole drilling, mounting brackets, modular drain shrouds, etc. (installed by others). All connections between the outside plumbing and the WAD-2240 lavatory deck are made underneath, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable deck rim height above the finished floor. -
AquaDeck 2250 Series Radiused Front Solid Surface Lavatory Deck
The Willoughby WAD-2250 AquaDeck Radiused Front Commercial Lavatory Sink is a single- or multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaDeck lavatory decks are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. The WAD-2250 deck can be ordered with up to four separate, integral wash stations, featuring R.6” radiused front corners with matching sides and eased edges. Standard WAD-2250 fixtures come with oval lavatory bowls and integral overflows, with the deck designed to be supported by an in-wall carrier system (in-wall carrier, anchoring hardware, and adequate backing by others). Heavy gauge, Type 304 stainless steel mounting brackets are an available manufacturer option. The WAD-2250 radiused front lavatory deck can be supplied with optional features, including: faucet hole drilling, mounting brackets, modular drain shrouds, etc. (installed by others). All connections between the outside plumbing and the WAD-2250 lavatory deck are made underneath, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable deck rim height above the finished floor. -
AquaDeck 2260 Series Contoured Front Solid Surface Lavatory Deck
The Willoughby WAD-2260 AquaDeck Contoured Front Lavatory Deck is a single- or multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaDeck lavatory decks are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. The WAD-2260 deck can be ordered with up to four separate, integral wash stations, featuring contoured front apron with eased edges. Also available is the W-SS- TR Waste Receptacle Design Option, which adds two stainless steel waste cans and 15” side-deck extensions w/ cutouts, for an integrated alternative to traditional standalone waste receptacles. Standard WAD-2260 fixtures come with oval lavatory bowls and integral overflows, with the deck designed to be supported by an in-wall carrier system (in-wall carrier, anchoring hardware, and adequate backing by others). Heavy gauge, Type 304 stainless steel mounting brackets are an available manufacturer option. The WAD-2260 contoured front lavatory deck can be supplied with optional features, including: faucet hole drilling, mounting brackets, modular drain shrouds, etc. (installed by others). All connections between the outside plumbing and the WAD-2260 lavatory deck are made underneath, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable deck rim height above the finished floor. -
15″ Wide Handicap-ADA Combination Lavatory/Toilet Units for use on 45 degree chase wall
The 15" Wide Handicap/ADA Combi (1545-series) is a stainless steel combination lavatory and toilet unit for security settings and use on a 45-degree chase wall. This combi is an ADA-compliant single-user fixture for use in security environments with 45-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1545-Series fixtures come with elongated blowout toilet, rectangular lavatory, integral grab bar, and standard 4-point mounting. The 15" Wide Handicap/ADA Combi fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The 1545-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 1545 is also available. -
AS-S3060ADA Aquasurf® Solid Surface 30×60 Roll-in Shower Base w/Integral Rear Trench Drain
The Willoughby AS-S3060ADA Aquasurf® Solid Surface ADA Roll In Shower Base, w/ Integral Rear Trench Drain, is a single-user 30 x 60 shower base for use in commercial, healthcare, and other environments. Willoughby Aquasurf® shower bases are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3060ADA shower bases features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The rear drain is available in Left, Center, or Right configurations. The AS-S3060ADA shower bases can be supplied with optional color-matched solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3636ADA shower base are made underneath the fixture. -
Ligature-resistant, front mounted, wall outlet, floor mounted, blowout series toilet
The Willoughby ASETW-1490-FM-FA Ligature-resistant, front mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETW-1490-FM-FA fixtures come with an elongated blowout toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASETW-1490-FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETW-1490-FM-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETW-1490-FM-FA with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU-FA Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within ot at the rear of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The ASUW-1314-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
ASFVCADA Ligature-resistant ADA Compliant Flush Valve Cover
The Willoughby ASFVCADA Ligature-resistant ADA-compliant Flush Valve Cover is a fabricated 14 gauge, Type 304 stainless steel accessory, designed to conceal exposed top spud toilet plumbing while meeting ADA requirements for clear space around toilet compartment grab bars (sold and installed separately). Stainless steel security screws are typically provided supplied with the sloped-top ASFVCADA cover, with any needed wall anchors supplied by others. The flush valve actuator can be mounted on either the left-front or right-front of the cover, with an included hole-cover plate to cover the unused push button hole. The ASFVCADA flush valve cover can be specified with any size flush valve actuator hole, and the cover can come in standard #4 stainless steel finish or DC white powder coat finish. -
Ligature-resistant, rear mounted, wall outlet, floor mounted, siphon jet series toilet
The Willoughby ASETWS-1490-FM Ligature-resistant, rear mounted, wall outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security or behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETWS-1490-FM fixtures come with an elongated siphon jet toilet bowl and standard 6-point floor mounting (4 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETWS-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETWS-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETWS-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Stainless Steel 18″ Wide Rear Mounted Handicap-ADA Compliant Lavatory
The Willoughby HS-1013-46-HC Stainless Steel 18" Wide Rear Mounted Handicap-ADA Compliant Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-HC fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1013-46-HC lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The HS-1013-46-HC lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Handicap-ADA Compliant Rear Mounted Drinking Fountain
The Willoughby DF‐1015‐96‐HC Stainless Steel Handicap-ADA Compliant, Rear Mounted Drinking Fountain is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard DF‐1015‐96‐HC fixtures come with an oval‐shaped basin, CDB drinking fountain bubbler, PSL1 single temperature non‐metering valve, EB elbow waste (1‐1/2” F.I.P.), and standard 4‐point mounting. The DF‐1015‐96‐HC drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal‐resistant, stainless steel cabinet. The DF‐1015‐96‐HC drinking fountain meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317- HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. The UW-1317- HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1317- HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
US/KS 3636-HC ADA-Compliant Transfer Cabinet Shower
Willoughby US/KS-3636-HC Cabinet Handicap Accessible Shower Units are ADA-compliant single-user, barrier free shower stall fixtures for use in security environments with an accessible mechanical chase. Unitized “US” handicap accessible shower units are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead-blast finish floor; fixtures are also available in Knockdown “KS” configuration (non-welded). Standard US/KS-3636-HC Handicap Cabinet Showers come with an integral ICD inside caulk drain (2”), removable strainer, GB3318 horizontal L-shape grab bar, GB24V vertical 24” grab bar, and FSS fold-up shower seat. The US/KS-3636-HC Handicap Cabinet Shower can be supplied with a variety of optional features including: valves, controls, plumbing, chase orientation, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. The US/KS-3636-HC Handicap Cabinet Shower meets all applicable ADA, UFAS, and ANSI accessibility guidelines. -
Ligature-resistant, front mounted, wall outlet, floor mounted, siphon jet series toilet
The Willoughby ASETWS-1490-FM-FA Ligature-resistant, front mounted, wall outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security or behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETWS-1490- FM-FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASETWS-1490- FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETWS-1490- FM-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETWS-1490- FM-FA with Top Spud inlet, it is recommended to order an ASFVC- Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Stainless Steel 18″ Wide Front Mounted Handicap-ADA Compliant Lavatory
The Willoughby HS-1013-46-HC-FA Stainless Steel 18" Wide Front Mounted Handicap-ADA Compliant Lavatory is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-HC- FA fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The HS-1013-46-HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The HS-1013-46-HC-FA lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Handicap-ADA Compliant Front Mounted Drinking Fountain
The Willoughby DF‐1015‐96‐HC‐FA Stainless Steel Handicap‐ADA‐Compliant, Front Mounted Drinking Fountain is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard DF‐1015‐96‐HC fixtures come with an oval‐shaped basin, CDB drinking fountain bubbler, PSL1 single temperature non‐metering valve, RPT slip‐joint P‐trap (1‐1/2” F.I.P.), with anchoring through the included Z‐clip and mounting holes (anchoring hardware by others). The DF‐1015‐96‐HC‐FA drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All valves and plumbing will be factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal‐resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The DF‐1015‐96‐HC‐FA drinking fountain meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU-FA Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). The UW-1317-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The UW-1317-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
US/KS-3636-HC-FA ADA-Compliant Front Access Transfer Cabinet Shower
The Willoughby US/KS-3636-HC-FA Front Access Handicap Cabinet Shower is an ADA-compliant single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Unitized “US” fixtures are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead-blast finish floor; fixtures are also available in Knockdown “KS” configuration (non-welded). Standard US/KS-3636-HC-FA Handicap Cabinet Showers come with an integral ICD inside caulk drain (2”), removable strainer, GB3318 horizontal L-shape grab bar, GB24V vertical 24” grab bar, and FSS fold-up shower seat. The US/KS-3636-HC-FA Front Access Handicap Cabinet Shower can be supplied with a variety of optional features including: valves, controls, plumbing, exterior finish, etc. All connections between the outside plumbing and the fixture are made behind the vandal-resistant, stainless steel shower panel. Removable shower panel attached w/ security screws allows access to all the fixture plumbing within. The US/KS-3636-HC-FA Front Access Handicap Cabinet Shower meets all applicable ADA, UFAS, and ANSI accessibility guidelines. -
BHS-3123 ADA-Compliant Solid Surface Bariatric Sink (Lavatory)
The Willoughby BHS-3123 ADA-Compliant Solid Surface Bariatric Sink (Lavatory) is a single-user solid surface sink fixture for use in bariatric healthcare environments. Willoughby Aquasurf® lavatory fixtures are constructed of Aquasurf® cast polymer resin, a stain-, impact-, and burn-resistant solid surface material. Standard BHS-3123 fixtures come with a contoured D-shaped lavatory basin; antimicrobial drain assembly w/ offset tailpiece; 1.5 gpm, 4CC, 8” gooseneck faucet and plumbing; and preassembled stainless steel mounting pedestal w/ solid polymer panel cladding. Standard anchoring is through the preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The rounded lavatory has been designed to withstand a static edge load of 1,000 lbs. to accommodate bariatric healthcare patients. The BHS-3123 bariatric lavatory can be ordered with a variety of optional features including: alternative faucets, faucet hole drilling, plumbing, etc. All connections between the outside plumbing and the BHS-3123 bariatric healthcare lavatory are concealed within the stainless steel pedestal, with a secure access panel attached w/ security screws allowing access to all fixture plumbing and mounting points inside. The BHS-3123 fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
CEL Multi-station Stainless Steel Washfountain
The Willoughby CEL Multi-station Stainless Steel Washfountain is a multi-user fixture for vandal-resistant commercial use. All CEL washfountain fixtures are fabricated from 14 gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard CEL fixtures come with an integral basin/pedestal; drain assembly; selected valve, controls, and plumbing; and stainless steel trap enclosure (shroud). It can be specified in either Two Station (CEL-2817- 2) or Three Station (CEL-4818- 3) configurations, with an Adult ADA or Junior ADA (JR) rim height. Anchoring is through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The CEL washfountain can be supplied with optional DC white powder coat finish. All connections between the outside plumbing and the CEL washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Ligature-resistant, rear mounted, floor outlet, floor mounted, siphon jet series toilet
The Willoughby ASETF-1490-FM Ligature-resistant, rear mounted, floor outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETF-1490-FM fixtures come with an elongated siphon jet toilet bowl and standard 4-point floor mounting (2 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETF-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location*) of the vandal-resistant, stainless steel toilet. The ASETF-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETF-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Stainless Steel 18″ Wide Rear Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory
The Willoughby HS-1014-96-HC Stainless Steel 18" Rear Mounted, Handicap-ADA Compliant, Rectangular Bowl, Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1014-96-HC fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1014-96-HC lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The HS-1014-96-HC lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Single Person Rear Mounted Washout Flush Straddle Urinal
The Willoughby UW-1412-WO Stainless Steel Single Person Rear Mounted Washout Flush Straddle Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- WO fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1412- WO urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1412- WO urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
US/KS-3660-HC ADA-Compliant Roll-In Cabinet Shower
Willoughby US/KS-3660-HC Roll-In Cabinet Handicap Showers are ADA-compliant single-user roll in showers for wheelchairs in security environments with an accessible mechanical chase. Unitized “US” fixtures are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead- blast finish floor; fixtures are also available in Knockdown “KS” configuration (non-welded). Standard US/KS-3660- HC Handicap Cabinet Showers come with an integral ICD inside caulk drain (2”), removable strainer, GB24 horizontal 24” grab bar, GB30 horizontal 30” grab bar, GB24V vertical 24” grab bar, and FSS fold-up shower seat. The US/KS-3660- HC Roll-In Handicap Cabinet Shower can be supplied with a variety of optional features including: valves, controls, plumbing, chase orientation, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. The US/KS-3660- HC Roll-In Handicap Cabinet Shower meets all applicable ADA, UFAS, and ANSI accessibility guidelines when equipped with shower valve controls mounted on the Back Wall of the fixture, adjacent to the FSS fold-up shower seat. -
CWLD Series Straight Front Stainless Steel Lavatory Deck
The Willoughby CWLD Straight Front Stainless Steel Lavatory Deck is a single- or multi-user fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWLD fixtures come with circular or oval lavatory bowls w/ OV overflows, elbow wastes w/ 1-1/2” O.D. connections, trap enclosure, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The CWLD lavatory deck can be supplied with a variety of optional features including: faucet hole punching, valves, controls, plumbing, etc. (installed by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture, within the standard trap enclosure/pipe shroud. The CWLD straight front lavatory deck meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Ligature-resistant, front mounted, floor outlet, floor mounted, siphon jet series toilet
The Willoughby ASETF-1490-FM-FA Ligature-resistant, front mounted, floor outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETF-1490-FM-FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASETF-1490-FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location*) of the vandal-resistant, stainless steel toilet. The ASETF-1490-FM-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETF-1490-FM-FA with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Stainless Steel 18″ Wide Front Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory
The Willoughby HS-1014-96-HC-FA Stainless Steel 18" Wide Front Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1014-96-HC-FA fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The HS-1014-96-HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The HS-1014-96-HC-FA lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Single Person Front Mounted Washout Flush Straddle Urinal
The Willoughby UW-1412-WO-FA Stainless Steel Single Person Front Mounted Washout Flush Straddle Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- WO-FA fixtures come with full perimeter flushing rim, 1-1/2” F.I.P. slip-joint P-trap, removable P-trap enclosure, with anchoring through the front flanges anchoring hardware by others). The UW-1412- WO-FA urinal can be supplied with a variety of optional features including: valves controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel urinal. The UW-1412- WO-FA urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
US/KS-3660-HC-FA ADA-Compliant Front Access Roll-In Cabinet Shower
The Willoughby US/KS-3660-HC-FA Roll-In Front Access Cabinet ADA Compliant Shower is a single-user fixture with a handicap shower base, intended for use in security environments where a mechanical chase is either non-existent or difficult to access. Unitized “US” fixtures are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead- blast finish floor; fixtures are also available in Knockdown “KS” configuration (non-welded). Standard US/KS-3660- HC-FA Handicap Cabinet Showers come with an integral ICD inside caulk drain (2”), removable strainer, GB24 horizontal 24” grab bar, GB30 horizontal 30” grab bar, GB24V vertical 24” grab bar, and FSS fold-up shower seat. The US/KS-3660- HC-FA Roll-In Front Access Handicap Cabinet Shower can be supplied with a variety of optional features including: valves, controls, plumbing, exterior finish, etc. All connections between the outside plumbing and the fixture are made behind the vandal-resistant, stainless steel shower panel. Removable shower panel attached w/ security screws allows access to all the fixture plumbing within. The US/KS-3660- HC-FA Roll-In Front Access Handicap Cabinet Shower meets all applicable ADA, UFAS, and ANSI accessibility guidelines when equipped with shower valve controls mounted on the Back Wall of the fixture, adjacent to the FSS fold-up shower seat. -
CWLDR Series Round Front Stainless Steel Lavatory Deck
The Willoughby CWLDR Round Front Stainless Steel Lavatory Deck is a single- or multi-user fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWLDR fixtures come with circular lavatory bowls w/ OV overflows, elbow wastes w/ 1-1/2” O.D. connections, trap enclosure, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The CWLDR lavatory deck can be supplied with a variety of optional features including: faucet hole punching, valves, controls, plumbing, etc. (installed by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture, within the standard trap enclosure / pipe shroud. The CWLDR round front lavatory deck meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Bariatric, front mounted, wall outlet, floor mounted, blowout series toilet
The Willoughby BETW-1490-FM-FA Bariatric, front mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in bariatric healthcare environments. Willoughby bariatric toilets are all-welded, fabricated from heavy gauge, Type 304 stainless steel, with an antimicrobial white powder coat finish, and bead-blast finish bowl. Standard BETW-1490- FM-FA fixtures come with an elongated blowout toilet bowl, integral contoured seat, full-perimeter toilet skirt w/ access panels, and open front bariatric toilet seat w/ hinged lid. Standard anchoring is through the included floor Z-clip and wall mounting flanges (anchoring hardware and adequate backing by others). The BETW-1490- FM-FA floor mount rear discharge toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. The BETW-1490- FM-FA toilet fixture meets all applicable ADA, CBC, and ANSI accessibility guidelines when equipped with the standard bariatric toilet seat (included with toilet, shipped separately). Ready to Order? Willoughby is ready to meet all of your security plumbing supply needs. Start your order today by finding a representative in your area. -
Stainless Steel Single Person Rear Mounted Blowout Flush Straddle Urinal
The Willoughby UW-1412-BJ Stainless Steel Single Person Rear Mounted Blowout Flush Straddle Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- BJ fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1412-BJ urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1412-BJ urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Bariatric, front mounted, wall outlet, floor mounted, siphon jet series toilet
The Willoughby BETWS-1490-FM-FA Bariatric, front mounted, wall outlet, floor mounted, siphon jet series toilet is a single-user stainless steel toilet with a bariatric toilet seat for use in healthcare environments. Willoughby's bariatric toilet is all-welded and fabricated from heavy gauge, Type 304 stainless steel. It features an antimicrobial white powder coat finish and a bead-blast finish bowl. Every standard BETWS-1490-FM-FA stainless toilet comes with an elongated siphon jet toilet bowl, an integral contoured seat, a full-perimeter toilet skirt w/ access panels, and an open front bariatric toilet seat w/ hinged lid. Standard anchoring is through the included floor Z-clip and wall mounting flanges (anchoring hardware and adequate backing by others). The BETWS-1490-FM-FA toilet can be supplied with a variety of optional features including valves, controls, and plumbing. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. The BETWS-1490-FM-FA toilet fixture meets all applicable ADA, CBC, and ANSI accessibility guidelines when equipped with the standard bariatric toilet seat (included with toilet, shipped separately). -
ES-1015-HC Handicap Stainless Steel Commercial Lavatory
The Willoughby ES-1015- HC Stainless Steel Handicap Commercial Lavatory is a single-user fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ES-1015- HC fixtures come with a rectangular-shaped lavatory bowl, 4” x 1-1/2” O.D. tailpiece, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The ES-1015- HC lavatory can be supplied with a variety of optional features including: faucet hole punching, valves, controls, plumbing, etc. (installed by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture. The ES-1015- HC lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Bariatric, front mounted, floor outlet, floor mounted, siphon jet series toilet (4-3/8″ rough-in)
The Willoughby BETF-1490-FM-FA Bariatric, front mounted, floor outlet, floor mounted, siphon jet series toilet (4-3/8" rough-in) is a single-user fixture for use in bariatric healthcare environments. Willoughby bariatric toilets are all-welded, fabricated from heavy gauge, Type 304 stainless steel, with an antimicrobial white powder coat finish, and bead-blast finish bowl. Standard BETF-1490-FM-FA fixtures come with an elongated siphon jet toilet bowl, integral contoured seat, full-perimeter toilet skirt w/ access panels, and open front bariatric toilet seat w/ hinged lid. Standard anchoring is through the included floor Z-clip and wall mounting flanges (anchoring hardware and adequate backing by others). The BETF-1490-FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel toilet. The BETF-1490-FM-FA toilet fixture meets all applicable ADA, CBC, and ANSI accessibility guidelines when equipped with the standard bariatric toilet seat (included with toilet, shipped separately). -
Stainless Steel Small Profile Handicap-ADA Compliant Front Access Drinking Fountain
The Willoughby DF-1812-FA Stainless Steel Small Profile Handicap-ADA Compliant, Front Access Drinking Fountain is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard DF-1812-FA fixtures come with a rounded rectangular basin, CDB drinking fountain bubbler, PSL1 single temperature non-metering valve, RPT slip-joint P-trap (1-1/2” F.I.P.), with anchoring through the included mounting plate (anchoring hardware by others). The DF-1812-FA drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All valves and plumbing will be factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The DF-1812-FA drinking fountain meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
Bariatric, front mounted, floor outlet, floor mounted, siphon jet series toilet (10″ rough-in)
The Willoughby BETF-1490-FM-FA-10” Bariatric, front mounted, floor outlet, floor mounted, siphon jet series toilet (10" rough-in) is a single-user fixture for use in bariatric healthcare environments. Willoughby bariatric toilets are all-welded, fabricated from heavy gauge, Type 304 stainless steel, with an antimicrobial white powder coat finish, and bead-blast finish bowl. Standard BETF-1490-FM-FA-10” fixtures come with an elongated siphon jet toilet bowl w/ 10” floor rough-in, integral contoured seat, full-perimeter toilet skirt w/ access panels, and open front bariatric toilet seat w/ hinged lid. Standard anchoring is through the included floor Z-clip and wall mounting flanges (anchoring hardware and adequate backing by others). The BETF-1490-FM-FA-10” toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel toilet. The BETF-1490-FM-FA-10” toilet fixture meets all applicable ADA, CBC, and ANSI accessibility guidelines when equipped with the standard bariatric toilet seat (included with toilet, shipped separately). -
36″ Wide Handicap-ADA Combination Lavatory/Toilet Units for use on 90 degree chase wall
The Willoughby 3696-Series 36" Wide Handicap-ADA Combination Lavatory/Toilet Units for use on 90 degree chase wall is a single-user fixture for use in security environments with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 3696-Series fixtures come with elongated blowout toilet, oval lavatory, and standard 6-point mounting. The 3696-Series Combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The 3696-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 3696 is also available. *ADA Compliance requires addition Grab Bar (GB4296), sold separately, field installed. -
Bariatric, front mounted, floor outlet, floor mounted, siphon jet series toilet (12″ rough-in)
BETF-1490-FM-FA-12" - The Willoughby Bariatric, front-mounted, floor outlet, floor mounted, siphon jet series toilet (12" rough-in) is a single-user fixture for use in bariatric healthcare environments. Willoughby bariatric toilets are all-welded, fabricated from heavy gauge, Type 304 stainless steel, with an antimicrobial white powder coat finish, and bead-blast finish bowl. Standard BETF-1490-FM-FA-12” fixtures come with an elongated siphon jet toilet bowl w/ 12” floor rough-in, integral contoured seat, full-perimeter toilet skirt w/ access panels, and open front bariatric toilet seat w/ hinged lid. Standard anchoring is through the included floor Z-clip and wall mounting flanges (anchoring hardware and adequate backing by others). The BETF-1490-FM-FA-12” toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel toilet. The BETF-1490-FM-FA-12” toilet fixture meets all applicable ADA, CBC, and ANSI accessibility guidelines when equipped with the standard bariatric toilet seat (included with toilet, shipped separately). -
36″ Wide Handicap-ADA Front Access Combination Lavatory/Toilet Units for use on 90 degree wall
The Willoughby 36" Wide Combination Unit (3696-FA-Series) Handicap-ADA Front Access Combination Lavatory/Toilet is for use on a 90-degree wall. This combi is an ADA-compliant* single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on a 90-degree interior wall. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 3696-FA-Series fixtures come with elongated blowout toilet, oval lavatory, and holes for 5-point anchor mounting (hardware provided by others). This 36" Wide Combination Unit fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. The 3696-FA-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 3696-FA is also available. *ADA Compliance requires addition Grab Bar (GB4296), sold separately, field installed. -
Stainless steel, compact, wall outlet, wall mounted, blowout series toilet
The Willoughby ETW‐1490‐ES Stainless steel, compact, wall outlet, wall mounted, blowout series toilet is a single‐user ADA toilet (ADA-compatible) fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW‐1490‐ES fixtures come with an elongated blowout toilet bowl and standard 6‐point mounting. The ETW‐1490‐ES toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear of the vandal‐resistant, stainless steel toilet. The ETW‐1490‐ES toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height. -
PWS Series Patient Wash Station
-
48″ Wide Handicap-ADA Combination Lavatory/Toilet Units for use on 90 degree chase wall
Willoughby 48" ADA Combination Unit is a 4896-Series 48" Wide Handicap-ADA Combination Lavatory/Toilet Unit for use on a 90-degree chase wall is an ADA-compliant single-user fixture for use in security and behavioral environments with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 4896-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, an integral grab bar with ligature-resistant closure plate, and standard 6-point mounting. It has been thoughtfully designed to minimize potential ligature points. The 4896-Series Combination fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The 4896-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 4896 is also available. -
Stainless steel, wall outlet, floor mounted, blowout series toilet
The Willoughby ETW-1490-FM Stainless steel, rear mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW-1490-FM fixtures come with an elongated blowout toilet bowl and standard 6-point floor mounting (4 in-wall, 2 in-floor). The ETW-1490-FM toilet can be supplied with a variety of optional features (valves, controls, plumbing). All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. The ETW-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. Ready to Order? Willoughby is ready to meet all of your security plumbing supply needs. Start your order today by finding a representative in your area. -
48″ Wide Handicap-ADA Front Access Combination Lavatory/Toilet Units for use on 90 degree wall
Willoughby 48" Willoughby Combination Unit (4896-FA-Series) is a Handicap-ADA Front Access Combination Lavatory/Toilet Unit for use on a 90-degree wall. This combi is an ADA-compliant single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on a 90-degree interior wall. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 4896-FA-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, an integral grab bar with ligature-resistant closure plate, and holes for 5-point anchor mounting (hardware provided by others). It has been thoughtfully designed to minimize potential ligature points. 48" Willoughby Combination Units can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. The 4896-FA-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 4896-FA is also available.